Chimney Repair in Tempe, AZ
Chimney repair for Tempe, AZ homes. Older masonry, crown cracks, and flashing leaks handled with attention to the city's mix of mid-century and newer housing.
Chimney repair for Tempe's older housing stock
Tempe sits northwest of Chandler and carries a lot of mid-century and older housing near ASU and the established neighborhoods around it. Those older brick chimneys have simply weathered more monsoon seasons and more decades of desert heat cycling than newer suburban builds. Mortar from the 1960s and 70s often reaches the point where it crumbles under a fingernail, and that soft mortar is the entry point for water.
When mortar fails on an older Tempe chimney, the fix is often tuckpointing — grinding out the failed joints and packing in fresh mortar matched to the original. Where individual bricks have spalled or split, they get replaced. Our chimney masonry repair service approach starts with figuring out how far the damage has traveled before any grinder touches the wall.
What we see on Tempe chimneys
The classic Tempe problem is a chimney that has been quietly leaking for years. Because rain here is infrequent, small leaks go unnoticed between storms until a ceiling stain finally appears. By then the flashing — the metal that seals the joint between chimney and roof — has often corroded or pulled loose, and the crown may be cracked as well.
Repair on these homes frequently combines flashing work, crown resurfacing, and spot masonry. If your Tempe chimney shows white staining, loose mortar, or a rusted cap, the chimney masonry repair repair process addresses the water path first so the masonry work lasts.
Book a Tempe chimney evaluation
Describe the symptoms on your Tempe chimney and we will help you understand what is causing them and what the repair involves.
Reach out to arrange an inspection at your convenience.
Frequently asked questions
My Tempe chimney is decades old — is it worth repairing?
Usually, yes. Older brick chimneys are almost always repairable through tuckpointing and selective brick replacement. A full rebuild is only necessary when the structure has moved or a large section has failed, which an inspection will determine.
How do I know if the leak is the flashing or the masonry?
It often takes an inspection to tell, because both can produce ceiling stains. Corroded or lifted flashing and cracked crowns are the two most common leak sources on older Tempe homes, and we check all of them together.
Can you match the mortar on an older home?
Yes. Matching the mortar color and mix helps the repair blend in and behave like the surrounding masonry. This matters more on older Tempe brickwork, where a mismatched patch stands out and can stress the original joints.